HL7005D

The HL7005D is a compact, flexible, high-efficiency, USB compliant switch-mode charge management device for single cell Li-ion and Li-polymer battery used in a wide range of portable applications. The charge parameters can be programmed through I²C interface. The HL7005D integrates a synchronous PWM controller, power MOSFET, input current sensing, high-accuracy current and voltage regulation, and charge termination function into a tiny CSP package. The HL7005D provides a complete automatic three-phase battery charging control: trickle charge, constant-current charge (CC), and constant voltage charge (CV) until the battery reaches the charge termination voltage. The input current is automatically limited to the value set by the host. Charging is terminated based on the battery voltage and a user selectable minimum current level. A safety timer with reset control provides a safety backup for I²C interface. During normal operation, the IC automatically restarts the charge cycle if battery voltage falls below an internal threshold and automatically enters a sleep mode or a high impedance mode when input supply is not correctly connected. The charge status can be reported to the host through the I²C interface. During the charging process, the IC monitors its junction temperature (TJ) and reduces the charge current once TJ increases to about 120°C. To support USB OTG device, the HL7005D can provide VBUS (5.0V) by boosting the battery voltage.

HL7005D is a compact, flexible, efficient, USB-compliant switch-mode charging management device suitable for single-cell lithium-ion and lithium-polymer batteries in various portable applications. Charging parameters can be programmed via the I2C interface. The HL7005D integrates a synchronous PWM controller, power MOSFET, input current detection, high-precision current and voltage regulation, and charge termination into a miniature CSP package. The HL7005D provides complete automatic three-stage battery charging control: trickle charge interface, constant current charging (CC), and constant voltage charging (CV), until the battery reaches the charge termination voltage. Input current is automatically limited to the value set by the host. Charging is terminated based on battery voltage and user-selectable minimum current levels. It features a reset-controlled safety timer, providing a safe backup for the I2C interface. During normal operation, if the battery voltage falls below an internal threshold, the IC automatically restarts the charging cycle, and when the input power is not properly connected, the IC automatically enters sleep mode or high-impedance mode. Charging status can be reported to the host via the I2C interface. During charging, the IC monitors its junction temperature (TJ) and reduces the charging current when TJ rises to around 120°C. To support USB OTG devices, the HL7005D provides VBUS (5.0V) by raising the battery voltage. The HL7005D is packaged in a 20-pin WLCSP.

Product Brief Datasheet

View product data

Features
パラメータ
Application
Related
Other

- 商品名: HL7005D
- 产品名称: 1.7A Li-Ion Battery Switching Charger with Integrated OTG Boost
- 产品简介: The HL7005D is a compact, flexible, high-efficiency, USB compliant switch-mode charge management device for single cell Li-ion and Li-polymer battery used in a wide range of portable applications. The charge parameters can be programmed through I²C interface. The HL7005D integrates a synchronous PWM controller, power MOSFET, input current sensing, high-accuracy current and voltage regulation, and charge termination function into a tiny CSP package. The HL7005D provides a complete automatic three-phase battery charging control: trickle charge, constant-current charge (CC), and constant voltage charge (CV) until the battery reaches the charge termination voltage. The input current is automatically limited to the value set by the host. Charging is terminated based on the battery voltage and a user selectable minimum current level. A safety timer with reset control provides a safety backup for I²C interface. During normal operation, the IC automatically restarts the charge cycle if battery voltage falls below an internal threshold and automatically enters a sleep mode or a high impedance mode when input supply is not correctly connected. The charge status can be reported to the host through the I²C interface. During the charging process, the IC monitors its junction temperature (TJ) and reduces the charge current once TJ increases to about 120°C. To support USB OTG device, the HL7005D can provide VBUS (5.0V) by boosting the battery voltage.
HL7005D is a compact, flexible, efficient, USB-compliant switch-mode charging management device suitable for single-cell lithium-ion and lithium-polymer batteries in various portable applications. Charging parameters can be programmed via the I2C interface. The HL7005D integrates a synchronous PWM controller, power MOSFET, input current detection, high-precision current and voltage regulation, and charge termination into a miniature CSP package. The HL7005D provides complete automatic three-stage battery charging control: trickle charge interface, constant current charging (CC), and constant voltage charging (CV), until the battery reaches the charge termination voltage. Input current is automatically limited to the value set by the host. Charging is terminated based on battery voltage and user-selectable minimum current levels. It features a reset-controlled safety timer, providing a safe backup for the I2C interface. During normal operation, if the battery voltage falls below an internal threshold, the IC automatically restarts the charging cycle, and when the input power is not properly connected, the IC automatically enters sleep mode or high-impedance mode. Charging status can be reported to the host via the I2C interface. During charging, the IC monitors its junction temperature (TJ) and reduces the charging current when TJ rises to around 120°C. To support USB OTG devices, the HL7005D provides VBUS (5.0V) by raising the battery voltage. The HL7005D is packaged in a 20-pin WLCSP.
- Fully automatic and efficient charge management for a large capacity lithium battery
  - Automatic conditioning, CC/CV charge control, termination, and recharge
  - 550-1450mA programmable charge current
  - Support 1.7A charge current using 56milliohm sensing resistor
  - 3MHz Synchronous PWM, 1µH low profile inductor
  - Input current regulation accuracy: ±5% (100mA and 500mA)
  - Charge voltage regulation accuracy:
    - -0.25% to 0.41% (25°C)
    - ±1% (0°C to 85°C)
    - ±2% (0°C to 125°C)
  - 20V Input voltage tolerance, 6.3V max operating voltage
  - Input voltage based dynamic power management (VIN DPM)
  - Optional 32s/30 minutes safety timer with reset control
  - Power up without battery
- Automatic adapter fault detection
- High impedance mode with low power consumption
- Comprehensive protections
  - Reverse battery leakage protection
  - Thermal regulation and shutdown
  - Input & output over-voltage protection
キーワード:
- hl7005d
- Subtitle
  - Subtitle
- Smart phone
- MP3 player
- Tablet PC
For the full datasheet, please contact sales.cn@halomicro.com to submit your request.

For more sample information, please contact Get samples to submit your request,

or contact marketing@halomicro.cn by email to state your requirements.

公式Wechatアカウント

中企跨境-全域组件 2.0 制作前进入CSS配置样式

导航下拉添加类名.active

在线客服添加返回顶部

CSS / JS 文件放置地

HL7005D

Message