HL5095K

The HL5095 is a slew-rate controlled, low Rdson Over voltage protection device. It is used in between a power source and a load to protect and isolate power source against unwanted abnormal voltage and current condition. Especially, in the OTG mode of smartphone, the HL5095 could be placed between OTG boost regulator and USB port. The HL5095 can protect boost regulator in smartphone from the USB fault conditions like overvoltage or overcurrent condition. In order to be used at high voltage application (9V or above), the HL5095A/HL5095KA and HL5095B/HL5095KB apply a high voltage device power FET switch and a maximum input voltage is 13.5V. Its over voltage protection level is set to 14.2V in HL5095A/HL5095KA version, 10.4V in HL5095B/HL5095KB and 5.8V in HL5095C/HL5095KC. To prevent excessive input voltage or battery droop resulting from a large inrush current, the HL5095 also implements several protection functions, such as output over voltage and input under-voltage protection, over-current protection with FLTB flag and over-temperature protection. HL5095 is available in a 9-pin WLCSP package.

Product Brief Datasheet

View product data

Features
パラメータ
Application
Related
Other

- 商品名: HL5095K
- 产品名称: Back to Back OVP with Adjustable Current limit
- 产品简介: The HL5095 is a slew-rate controlled, low Rdson Over voltage protection device. It is used in between a power source and a load to protect and isolate power source against unwanted abnormal voltage and current condition. Especially, in the OTG mode of smartphone, the HL5095 could be placed between OTG boost regulator and USB port. The HL5095 can protect boost regulator in smartphone from the USB fault conditions like overvoltage or overcurrent condition. In order to be used at high voltage application (9V or above), the HL5095A/HL5095KA and HL5095B/HL5095KB apply a high voltage device power FET switch and a maximum input voltage is 13.5V. Its over voltage protection level is set to 14.2V in HL5095A/HL5095KA version, 10.4V in HL5095B/HL5095KB and 5.8V in HL5095C/HL5095KC. To prevent excessive input voltage or battery droop resulting from a large inrush current, the HL5095 also implements several protection functions, such as output over voltage and input under-voltage protection, over-current protection with FLTB flag and over-temperature protection. HL5095 is available in a 9-pin WLCSP package.
- Input Voltage Range :
  - HL5095A, HL5095KA : 2.5V ~ 13.5V
  - HL5095B, HL5095KB : 2.5V ~ 10V
  - HL5095C, HL5095KC : 2.5V ~ 5.5V
- 28V Absolute Maximum Voltage Rating of VOUT
- Adjustable Current Limit with external resistor
- Integrated Power FET switch with 53mΩ Rds(on) @ 5V/1A
- Built in Soft Start to prevent inrush current
- Protection
  - Over Temperature Protection (OTP)
  - Over Voltage Protection (OVP) :
    - HL5095A, HL5095KA : 14.2V
    - HL5095B, HL5095KB : 10.4V
    - HL5095C, HL5095KC : 5.8V
  - Over Current Protection
  - Reverse Current Protection
- Compliance to IEC61000-4-2 on VOUT
  - Contact discharge: ±8kV
  - Air Gap discharge: ±15kV
- Package:
  - HL5095A, HL5095B, HL5095C: 9-Bump WLCSP, 0.4mm Pitch,1.23mm x 1.23mm
  - HL5095KA, HL5095KB, HL5095KC: 9-Bump WLCSP, 0.4mm Pitch,1.22mm x 1.22mm
キーワード:
- HL5095K
- Subtitle
  - Subtitle
- Smartphones, Tablet PC, Note PC
- Mobile IoT Devices
For the complete datasheet, please contact sales.cn@halomicro.com to submit your request.

For more sample information, please contact Get samples to submit your request,

or contact marketing@halomicro.cn by email to state your requirements.

公式Wechatアカウント

中企跨境-全域组件 2.0 制作前进入CSS配置样式

导航下拉添加类名.active

在线客服添加返回顶部

CSS / JS 文件放置地

HL5095K

Message