Back to Back OVP with Adjustable Current limit
HL5075
Message
The HL5075 is a slew-rate controlled, low Rdson, over-voltage protection device. It is used in between a power source and a load to protect and isolate power source against unwanted abnormal voltage and current condition. Especially, in the OTG mode of smartphone, the HL5075 could be placed between OTG boost regulator and USB port. The HL5075 can protect boost regulator in smartphone from the USB fault conditions like over-voltage or over-current.
In order to be used at high voltage application (9V or above), the HL5075 apply a high voltage device power FET switch which allows a maximum input voltage of 13.5V. The over-voltage protection threshold is set to 14.2V in HL5075WL01, 10.4V in HL5075WL02, 5.8V in HL5075WL03 and 11.5V in HL5075WL04.
To prevent excessive input voltage or battery droop resulting from a large inrush current, the HL5075 also implements several protection functions, such as over-current protection with FLTB flag, input under-voltage protection, reverse-current protection and over-temperature protection.
HL5075 is available in a 9-pin WLCSP package.
Product Brief Datasheet
- Features
- パラメータ
- Application
- Related
- Other
-
- 商品名: HL5075
- 产品名称: Back to Back OVP with Adjustable Current limit
- 产品简介: The HL5075 is a slew-rate controlled, low Rdson, over-voltage protection device. It is used in between a power source and a load to protect and isolate power source against unwanted abnormal voltage and current condition. Especially, in the OTG mode of smartphone, the HL5075 could be placed between OTG boost regulator and USB port. The HL5075 can protect boost regulator in smartphone from the USB fault conditions like over-voltage or over-current. In order to be used at high voltage application (9V or above), the HL5075 apply a high voltage device power FET switch which allows a maximum input voltage of 13.5V. The over-voltage protection threshold is set to 14.2V in HL5075WL01, 10.4V in HL5075WL02, 5.8V in HL5075WL03 and 11.5V in HL5075WL04. To prevent excessive input voltage or battery droop resulting from a large inrush current, the HL5075 also implements several protection functions, such as over-current protection with FLTB flag, input under-voltage protection, reverse-current protection and over-temperature protection. HL5075 is available in a 9-pin WLCSP package.
- Input Voltage Range :
- HL5075WL01 : 2.5V ~ 13.5V
- HL5075WL02 : 2.5V ~ 10V
- HL5075WL03 : 2.5V ~ 5.5V
- HL5075WL04 : 2.5V ~ 11V
- HL5075WL01 : 2.5V ~ 13.5V
- 28V Absolute Maximum Voltage Rating of VOUT
- Adjustable Current Limit with external resistor
- Integrated Power FET switch with 53mΩ Rds(on) @ 5V/1A
- Built in Soft Start to prevent inrush current
- Protection
- Over Temperature Protection (OTP)
- Over Voltage Protection (OVP) :
- HL5075WL01 : 14.2V
- HL5075WL02 : 10.4V
- HL5075WL03 : 5.8V
- HL5075WL04: 11.5V
- Over Current Protection
- Reverse Current Protection
- HL5075WL01 : 14.2V
- Compliance to IEC61000-4-2 on VOUT
- Contact discharge: ±8kV
- Air Gap discharge: ±15kV
- 1.2V IO compatible – EN, FLTB
- Contact discharge: ±8kV
- Package: 9-Bump WLCSP, 0.4mm Pitch,1.22mm x 1.22mm
キーワード:- HL5095K
-
-
Subtitle
- Subtitle
-
-
- Smartphones, Tablet PC, Note PC
- Mobile IoT Devices
- Smartphones, Tablet PC, Note PC
-
For the full datasheet, please contact sales.cn@halomicro.com to submit your request.
For more sample information, please contact Get samples to submit your request,
or contact marketing@halomicro.cn by email to state your requirements.
公式Wechatアカウント
中企跨境-全域组件 2.0
制作前进入CSS配置样式
在线客服添加返回顶部
CSS / JS 文件放置地